ISI JOURNAL PUBLICATIONS

 

  1. Alielahi, H., Adampira, M., (2018) “Evaluation of 2D Seismic Site Response due to Hill-Cavity Interaction Using Boundary Element Technique” Journal of Earthquake Engineering, Taylor and Francis, Vol. 22, Issue 6, pp. 1137-1167. 
  2. Kavand, A., Alielahi, H., (2017) “Site-specific probabilistic seismic hazard analysis for northern part of the Qeshm Island, IranNatural Hazards 88 (2), 919-946.
  3. Koohsari, H., Alielahi, H., Najafi, A., Adampira, M., (2017) “Evaluation of Influential Factors on the Estimated Improvement Depth of Dynamic Compaction using Fuzzy Method and PSO” Soils and Foundations Journal, Elsevier Publication. DOI: 10.1016/j.sandf.2016.08.012.
  4. Alielahi, H., Rabeti Moghadam, M., (2017) "Fragility Curves Evaluation for Broken-Back Block Quay Walls" Journal of Earthquake Engineering, Taylor and Francis, Vol. 21, Issue 1, pp.1–22.
  5. Rabeti Moghadam M., Alielahi, H., and Sadeghi Abdollahi A. (2017), “Numerical Evaluation of Liquefaction-induced Damages in Composite Breakwaters and Its Application for Performance-Based Improvement Design”, Marine Georesources & Geotechnology, Taylor and Francis, Vol. 35, No. 3, 376–396.
  6. Alielahi, H., Adampira, M., (2016) “Seismic Effects of Two-Dimensional Subsurface Cavity on the Ground Motion by BEM: Amplification Patterns and Engineering Applications” International Journal of Civil Engineering. Springer publication, June 2016, Volume 14, Issue 4, pp. 233-251.
  7. Panji, M., Koohsari, H., Adampira, M., Alielahi, H.,Asgari Marnani, J., (2016), “Stability analysis of shallow tunnels subjected to eccentric loads by a boundary element method” Journal of Rock Mechanics and Geotechnical Engineering, Elsevier Publication, Volume 8, Issue 4, August 2016, Pages 480–488.
  8. Alielahi, H., Adampira, M., (2016) "Effect of twin-parallel tunnels on seismic ground response due to vertically in-plane waves" International Journal of Rock Mechanics and Mining Sciences, Elsevier Publication, Volume 85, May 2016, pp. 67–83.
  9. Alielahi, H., Adampira, M., (2016) "Site-specific response spectra for seismic motions in half-plane with shallow cavities" Soil Dynamics and Earthquake Engineering, Elsevier Publication, Volume 80, Jan 2016, pp. 163–167.
  10. Hamid Alielahi, Mohamad Adampira, (2016), "Comparison between Empirical and Experimental Ultimate Bearing Capacity of Bored Piles – Case Study", Arabian Journal of Geosciences, Springer publication, January 2016, 9:78.
  11. H. Alielahi, M. Kamalian, M. Adampira., (2016) “A BEM investigation on the influence of underground cavities on the seismic response of canyons” Acta Geotechnica Journal, Springer publication, April 2016, Volume 11, Issue 2, pp. 391-413.
  12. Alielahi, H., Kamalian, M., Adampira, M., (2015), "Seismic Ground Amplification by Unlined Tunnels Subjected to Vertically Propagating SV and P Waves using BEM" Soil Dynamics and Earthquake Engineering, Elsevier Publication, Volume 71, April 2015, pp.63–79.
  13. Adampira, M., Alielahi, H., Panji, M., Koohsari, H., (2015), “Comparison of equivalent linear and nonlinear methods in seismic analysis of liquefiable site response due to near-fault incident waves: a case study” Arabian Journal of Geosciences, Springer publication, Issue 5, Vol. 8, pp 3103-3118.
  14. H. Alielahi, M. Kamalian, J. Asgari Marnani, Mohammad K. Jafari, M. Panji., (2013)‌”Applying a Time-domain Boundary Element Method for Study of Seismic Ground Response in the Vicinity of Embedded Cylindrical Cavity " . International Journal of Civil Engineering. Vol. 11, No. 1; pp. 45-54.

 

JOURNAL PUBLICATIONS (Peer-Reviewed)

 

  1. Khosrow Mehrshahi, Hamid Alielahi, (2018), “Estimating Geotechnical Design Pararmeters of Improved Soil by the Preloading Method Using Instrumentation Results and Numerical Approach- a Case Study” Journal of Civil Engineering, Ferdowsi University of Mashhad, Iran, DOI:10.22067/civil.v1i30.52137 (In Persian).
  2. Arash Rostami, Hamid Alielahi, Abdoreza Sarvghad Moghadam, Mahmood Hosseini, (2016), “Steel Buildings’ Seismic and Interaction Behavior, Under Different Shapes of Tunnel Drilling” International Journal of Geotechnical Earthquake Engineering, Volume 7, Issue 2.
  3. H. Alielahi, P. Karimkhani, (2016), ”Studying the Effects of U-Shaped Canyons and Underground Cavities Interaction on the Surface Ground Motion due to SV and P Waves by BE ApproachJournal of Seismology and Earthquake Engineering. Vol. 18, No. 4.
  4. Zahra Mardani, Hamid Alielahi, Seyyed Mehdi Hashemi, (2015), “Comparison of Lateral Bearing Capacity of Tapered Pile Groups with Simple Piles in Granular Soils using Numerical Method” Electronically Journal of Geotechnical Engineering (EJGE), Vol. 20, Bund. 21.
  5. Alielahi, H.,, Mardani, Z., Daneshvar, S., (2014), “Influence of Under-reamed Pile Groups Arrangement on Tensile Bearing Capacity using FE Method” Electronically Journal of Geotechnical Engineering (EJGE), Vol. 19, Bund. G.
  6. Sanaei Farokhi. A., Alielahi, H.,, Mardani, Z., (2014), “Optimizing the Performance of Underreamed Piles in Clay using Numerical Method” Electronically Journal of Geotechnical Engineering (EJGE), Vol. 19, Bund. G.
  7. M. Jalili., I. Rahmani., H. Alielahi., (2010), “Clarification on the Methodology of Calculation of  Seismic Lateral Earth Pressure in Cohesive Soils”Electronically Journal of Geotechnical Engineering (EJGE), Vol. 15, Bund. L.
  8. Y. Jafarian., H. Alielahi., A. sadeghi Abdollahi., R. Vakili., (2010), “Seismic Numerical Simulation of Breakwater on a Liquefiable Layer: IRAN LNG Port” Electronically Journal of Geotechnical Engineering (EJGE), Vol. 13, Bund. B.

CONFERENCE PROCEEDINGS (Peer-Reviewed)

 

  1. Alielahi, H., Adampira, M., (2016) “Seismic Amplification of the Topographic Irregularities with a Circular Tunnel Caused by SV Waves” 5th International conference on Geotechnical Engineering and Soil Mechanics, Tehran, Iran.
  2. Alielahi, H., Karimkhani, P., (2015), “Influence of Underground Cavity on the Seismic Response of U-Shaped Canyon Using BEM”, 7th International Conference of Seismology and Earthquake Engineering (SEE7), Tehran, Iran.
  3. Mardani, Z., Alielahi, H., Sanaei Farokhi. A., (2014), “Evaluating the Effect of Geometrical Shape of Underreamed Piles in Clay on their Bearing Capacity Using Numerical Method 8th National Congress on Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran .
  4. Alielahi, H.,, Mardani, Z., Daneshvar, S., (2014), Arrangement optimization of asymmetric Under-reamed pile groups in order to evaluate tensile bearing capacity using numerical method” 8th National Congress on Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran .
  5. H. Alielahi, P.Karimkhani, M. Adampira, (2015) “Seismic Response of U-shaped Canyon in Presence of Underground Cavity Using BEM” 6th International Conference on Earthquake Geotechnical Engineering, 1-4 November 2015, Christchurch, New Zealand.
  6. A. Sadeghi Abdollahi., R. Vakili., H. Alielahi., (2010), “Designing Pipeline Protection by Static Equilibrium Analysis in IRAN LNG Port” International Canadian Geotechnical Engineering Conference (GEO2010).
  7. H. Alielahi., H. Nouri., B. Ebrahimian., (2009), “Performance based design of Shahid Rajaee diaphragm wall: pseudo -static and dynamic perspective” International Conference on Performance-Based Design in Earthquake Geotechnical Engineering (IS Tokyo2009).
  8. Razmkhah, A., Kamalian, M., Alielahi, H., (2008), Seismic Behavior of 2D Topographic Features Subjected to Vertically Propagating Incident SV at High Frequencies” GEESD IV, the 4th decennial Geotechnical Earthquake Engineering and Soil Dynamics Conference organized by the EESD Committee of ASCE's Geo-Institute. 
  9. H. Nouri., Alielahi, H., Jalili, M., Seyedi Hosseininia, E.  (2008), “Evaluation of Empirical Relationships for Dynamic Compaction in Liquefiable Reclaimed Silty Sand Layers using Pre/Post Cone Penetration Tests”, Sixth International Conference on Case histories in Geotechnical Engineering and symposium in honor of professor James k. Mitchell.
  10. Razmkhah, A., Kamalian, M., Alielahi, H., (2008), Two-dimensional Numerical Analysis of homogenous Topographic Features Using BEM” The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, India.
  11. Razmkhah, A., Kamalian, M., Alielahi, H., (2007), Low Period amplification Patterns of Topographic Features Subjected to Vertically Propagating Incident SV Waves”, 4th International Conference on Earthquake Geotechnical Engineering, Greece.

 

     BOOKS

  1. Seyed Ehsan Seyyedi Hosseininia, Hamid Alielahi,  (2013), “An Overview of the Block Quay Wall Design” (in Persian).
  2. Hamid Alielahi,Maryam Rahimi, “Soil Dynamics” under prepared, (in Persian).
  3. Hamid Alielahi,Maryam Rahimi, “Geotechnical Earthquake Engineering” under prepared, (in Persian).
  4. Hamid Alielahi,Shayan Mahjoobi, “An Introduction to Ground Improvement Techniques” under prepared, (in Persian).

TECHNICAL JOURNAL REFEREE

Journal                   Journal of Earthquake Engineering
Reviewer               Journal of Tunnelling and Underground Space Technology
Journal of Soil Dynamics and Earthquake Engineering
Journal of Earthquake Engineering and Engineering Vibration
International Journal of Civil Engineering